BDA

AGS/BDA Task Force – Initial Survey Feedback Revealed

The following is an update from the Joint AGS/BDA Task Force regarding the initial feedback and results from the recent industry-wide survey conducted to evaluate the current state of the UK’s ground investigation industry.

A survey of the UK ground investigation industry was conducted in July and August 2016.

The results are being assessed by the joint AGS and BDA Taskforce, and will be published over the next few weeks. Opportunities for comment and further discussion will be provided subsequently.

This notice gives initial feedback on the Survey.

  • The Survey attracted 585 responses from across the industry, which is very encouraging for such an exercise. There was considerable diversity within the population. Interestingly, fewer than half the respondents were members of either Association.
  • In addition to answering the quantitative questions, respondents were very generous with their comments and suggestions on how the industry could be improved.
  • 60% of respondents reported that they had a good working knowledge of the relevant Technical Standards for the industry (EC7). This implies that 40% do not!
  • 70% of respondents reported that they always or usually applied the Technical Standards in their work (and had the authority to do so). This implies that 30% do not!
  • 75% of respondents had a good working knowledge of the relevant Health and Safety legislation for the industry (and had the authority to apply it). This implies that 25% do not!
  • 80% of respondents thought that procurement decisions based on cost discouraged adherence to the Technical Standards.
  • 55% of respondents thought that Technical Standards are not rigorously enforced, and that people are not honest/open about how much they adhere to the Standards.
  • 50% of respondents thought that there was a skills shortage in the industry.
  • 35% of respondents thought that some practices in the UK ground investigation industry were no longer ‘fit for purpose’. Only 20% disagreed; the remainder were neutral.
    • Particular practices were clearly targeted ahead of others.
  • Respondents thought that the 5 most important challenges facing the industry were:
    o Availability of suitably qualified people
    o Raising the understanding of those involved in the procurement process
    o Attracting young recruits to the industry
    o Improving the image of the industry
    o Encouraging innovation

There is a lot more detail to analyse.

theGeotechnica – Issue No.53 October 2016

October 2016

– Digital Data Entry gets even better with KeyLogbook V2.6 – Revealing details of the latest KeyLogbook release is Keith Spires, Operations Director at the Equipe Group. In the following article, Keith discusses what can be expected from the v2.6 release of the industry’s leading digital data entry product.

– New AutoCAD Civils 3D Geotechnical Module boosts usability – In the last few months Autodesk have released their Geotechnical Module for AutoCAD Civils 3D 2017 following development by Keynetix. The module looks set to greatly assist with geotechnical data visualisation and Keynetix are offering free online training to accompany the release.

– Registration now open for Geotechnica 2017 – 2017 will mark the eighth successive year of Geotechnica and will have a host of new and exciting features to compliment the already highly successful and acclaimed Trade Show, Product Exhibition and Geotechnical Conference.

– New Cable Percussion Guidance Document Issued – The BDA issue a new Guidance Document titled, ‘The Operation of Cable Percussion Rigs & Equipment’.

– The British Drilling Association Turns 40 – The BDA is celebrating its 40th anniversary this year and is using the milestone to take a reflective look at its many achievements.

– Aarsleff’s biggest ever project gets underway – Providing an update on recent contract works are Aarsleff, one of theGeotechnica’s valued regular contributors. In this month’s issue Aarsleff reveal details their largest ever piling project to date as The Range build a new distribution centre in Avonmouth.

To view this month’s issue of theGeotechnica as a Flipbook, click here…

To view this month’s issue of theGeotechnica as a PDF, click here…

 

theGeotechnica – Issue No.50 May 2016

May 2016

– The Task Ahead – theGeotechnica provides more specific information regarding both the intention of the new AGS/BDA Task Force initiative and the format of the survey it will aim to produce. Background information on the people behind the initiative is also included. In this article we will hear from the Team Leaders in charge of organising the creation, distribution and analysis of the survey, about why they chose to become involved and what they hope the collaboration can achieve.

– Help! We’ve gone artesian! – Providing the fourth in a series of pieces for theGeotechnica is Liz Withington, Senior Manager at Geotechnical Engineering Ltd. This month Liz tackles the tricky issue of coping with artesian conditions on flooding drill sites.

– Equipe Training – An 8 Year Journey – During the course of the last 50 issues of theGeotechnica, its parent company the Equipe Group have gone from strength to strength – mirroring the magazine’s continued success. In this retrospective piece we will be looking back at the history of Equipe, documenting the growth of the UK’s only dedicated geotechnical training provider.

– Volatile Organic Compounds – In another excellent, technical article, Hazel Davidson of Derwentside Environmental Testing Services returns to write for theGeotechnica. This month, Hazel turns her attention to Volatile Organic Compounds, providing valuable insight into what VOC’s actually are.

To view this month’s issue of theGeotechnica as a Flipbook, click here…

To view this month’s issue of theGeotechnica as a PDF, click here…

 

theGeotechnica – Issue No.49 April 2016

April 2016

– Second Edition: Soil and Rock Description in Engineering Practice – Early 2016 has seen the release of the Second Edition of Professor David Norbury’s highly acclaimed description handbook – Soil and Rock Description in Engineering Practice. The new handbook has been eagerly awaited by many within the industry, with the latest edition incorporating changes in the national and international standards for logging soils and rock. This month, theGeotechnica discusses details of the new handbook with Professor Norbury himself.

– How well do you know PUWER? – Providing the third in a series of pieces for theGeotechnica is Liz Withington, Senior Manager at Geotechnical Engineering Ltd. This month Liz tackles the Provision and Use of Work Equipment Regulations 1998 – or PUWER for short.

– Wookey Hole Catch Nets – Providing their first contribution to theGeotechnica is Tony Bailey, Project Manager at Geobrugg AG. In this excellent case study, Tony explains how Geobrugg used innovative methods to install vital catch nets at Wookey Hole.

– Cable Percussion Guidance Update – The following is an update on the upcoming release of new Cable Percussion Drilling Guidance notes to be provided by the British Drilling Association. The new guidance will look to build on previous versions to provide the most complete guide to cable percussion drilling that has ever been released in the UK. The writing of the new guidance will be a collaborative effort by a number of highly experienced cable percussion drillers, in the hope that the outcome will be as balanced and detailed as possible.

To view this month’s issue of theGeotechnica as a Flipbook, click here…

To view this month’s issue of theGeotechnica as a PDF, click here…

 

theGeotechnica – Issue No.48 March 2016

March 2016

– Understanding Total Petroleum Hydrocarbons (TPH) – Writing for theGeotechnica this month is Hazel Davidson of Derwentside Environmental Testing Services. In another excellent entry from Hazel, the topic in focus is Total Petroleum Hydrocarbons (TPH) and the confusion that surrounds them.

– Where does health and safety start? – Providing another informative piece for theGeotechnica this month is Liz Withington, Senior Manager at Geotechnical Engineering Ltd. This month Liz asks where health and safety starts for a drilling contractor, starting with LOLER Inspections.

– Land Drilling Apprenticeships – Recruitment is underway for the British Drilling Association’s 2016 Land Drilling Apprenticeships and the BDA are on the lookout for potential candidates. In this article the BDA provide some more information on the scheme and what it can offer you.

– UK GI Analysis – Recently a statement was made to a number of industry leading practitioners, questioning not only the quality of the UK ground investigation industry, but also the morale and the low public opinion of the sector. In reaction to this, the AGS and BDA have combined to create an initiative to analyse and improve the state of the UK GI industry – The Task Force. This month theGeotechnica has an exclusive insight into the aims of the initiative, including details of an upcoming survey to be sent to all contractors, consultants and ‘clients’ working within the sector.

To view this month’s issue of theGeotechnica as a Flipbook, click here…

To view this month’s issue of theGeotechnica as a PDF, click here…